From empty paddock to a working farm shed in Apple Tree Creek

Joel Ricciardi needed one shed to do two jobs on his family’s macadamia farm in Apple Tree Creek, Queensland: store his farm machinery and give him room to work on cars. The hard part was picturing what would work before anything was built.
Joel had dealt with Jo before and remembered how good she was to work with. When he found Global Sheds online and got Jo again, he knew who he wanted to help him. They worked through several quote options, adjusting the shed size and door heights around what he needed to park inside. The colours came later. Getting the machinery in and out came first.
“Nothing was too hard for Jo.”
Joel Ricciardi, Apple Tree Creek
The finished shed: 13 m × 20 m × 4.7 m, a 10° roof pitch and four roller doors along the long side, each specified at 4 m wide × 4.2 m high. Global Sheds supplied the kit; Joel arranged the concrete and erection with a local mate. Now when people pull in from the road to ask about the shed, he’s happy to show them around. He’s since recommended Global Sheds to other farmers.

Comparing machinery shed quotes? Check the whole way in.
A quote with a 3 m roller door isn’t like-for-like if you asked for 4 m. And the quoted door size isn’t necessarily the usable opening. Check the clear width and height on the drawings, then follow the approach your machinery will actually take. A low point under a sloping awning or a tight turn into the bay can stop equipment from reaching a door it would otherwise fit through. Compare the accessories and inclusions as well, and ask for the steel manufacturer and origin in writing.
Global Sheds now records your intended use and minimum clearances in a pre-contract checklist. You review and sign off on those requirements line by line. Maryanne checks them against the shed design and engineering and looks at where the shed sits on the block. If something doesn’t work, we stop and revise the design before you sign the contract or pay.
What do you need for a quote?
Start with where you’re building and what you’ll use the shed for. The build-site location is essential because the engineering and pricing depend on the site. No street address? Give us the lot number, call us to talk through the location, or send a map screenshot with an X where the shed will go. If you know the height and width of your largest machine, include them. If you don’t, we can work through that together.
Planning a machinery shed kit anywhere in Australia? Tell us where it’s going and what it needs to fit.
