How Much Does a 6×6 or 6×9 Shed Cost in Australia?

Charcoal steel double garage with a single wide roller door and side access door among gum trees.
Illustrative steel garage with a wide roller door and side access.

If you’re pricing a double garage or workshop, get separate figures for the steel kit, delivery, site preparation, concrete and installation. A 6×6 shed gives you 36 m² of floor area. A 6×9 gives you 54 m². Those extra three metres can give you room for a workbench and storage behind your vehicles, depending on what you park and where the doors go.

6×6 double garage vs 6×9 workshop

6×6 double garage

36 m²

6 m wide × 6 m deep

6×9 workshop

36 m²+18 m²

6 m wide × 9 m deep

What to compare6×6 double garage6×9 workshop
Footprint36 m²54 m²
Typical useVehicle parkingVehicle parking plus room for a bench or storage
Region B kit quote, incl. GST$12,898$14,511
Region C kit estimate, incl. GST$15,447$17,512
Indicative range across these examples, incl. GST$12,898–$15,447$14,511–$17,512
DeliveryCheck whether it is included in the quoteCheck whether it is included in the quote
Concrete and erectionArrange and price separatelyArrange and price separately

The August 2026 Region B quotes were for the same property. Both had 3.5 m eaves, a motorised 5 m nominal roller door and a personal access door. Adding three metres of depth added $1,613 including GST.

For the November 2026 Region C estimates, we used the same footprints, eave height and nominal door size, with a WindStrong roller door and cyclonic roof assembly. Adding three metres of depth added $2,065 including GST. The estimates used modelled wind conditions and standard freight allowances. Your quote will use the wind conditions and delivery cost for your property.

What changes the price of a shed kit?

The footprint is only part of the quote. Start by deciding what needs to fit through the door. Measure your tallest vehicle with roof racks or accessories fitted and ask for the clear opening height and width. Shed eave height and clear door height are different measurements. A wider opening, taller walls, a motorised door, insulation or extra windows can all change the price.

Location matters too. Global Sheds designs its kits for the nominated site. Local wind conditions and exposure can affect the frame and door specification, even for sheds with the same dimensions.

What else should I budget for?

  • Delivery. Confirm the freight cost and tell your supplier about narrow gates, steep driveways or limited truck access.
  • Site preparation and concrete. Give your concreter the project drawings before asking for a price. Ask whether the quote includes excavation, fill, drainage and the specified slab or footing work. If you already have a slab, check whether it suits the proposed design.
  • Installation. Ask the installer to itemise assembly, door fitting and any lifting equipment. Price electrical work separately if you plan to add lighting, power points or a powered door.
  • Approvals and inspections. Check what applies to your address with your council or certifier. Read the shed council approval guide.

Is the extra three metres worth it?

Steel workshop interior with a ute parked to one side and a workbench at the back.
Illustrative workshop layout. Vehicle, slab, lighting and fit-out are separate from the kit.

Mark out both footprints on the ground and park the vehicles you want to store. Open the doors and boot, then mark out the bench or shelving. If your gear takes up the space you need to walk around the vehicles, price the 6×9 while you’re still deciding. Ask for both designs at the same address with the same door and accessory specifications so you can see what the extra depth adds to the kit price.

Global Sheds supplies site-specific steel shed kits. Tell us your site address, what you need to fit inside and the door clearance you need. If you’re deciding between a 6×6 and a 6×9, ask us to quote both.

Get a kit price for your address

Share this:

Facebook
Instagram
LinkedIn
Email